If you do, I would appreciate any comments. Although altered either way, it would be a nice save if someone would procure two rifled tubes and put it back in it's original condition. You could even take two Remington or Mossberg rifled barrels and machine them down to a workable OD, bore out the barrels and glue/solder them in like the system used for centerfire rifles.
One item of not is that the ad showed them as originally 20 ga, but didn't specify the chamber. When I got the Sauer, someone on the board here pointed me in the right direction and some investigation showed that the barrel I had was in 1-5/8" Lancaster,I believe. During that period they made cases in a number of lengths in 20 ga (and others).
