Hello Everyone, my first post here!
I did post this earlier but in the wrong forum, so I hope that you don't mind that I am reposting it here.
So, I recently purchased a 100 year old English Sidelock.
I have decided to keep the gun in its original condition but I am wondering if there is anything that I can do to refresh the wood without removing it from the metal.
The oil finish is a bit cloudy and dull, so I am wondering if I can say, rub the wood down with a rag wet with a light degreaser, and then once dry, apply something like True Oil lightly with my fingertips and build up the finish
Again nothing drastic, just something that might freshen up the wood and show off the grain better. If not, I will leave it alone
I would appreciate your comments and advice!
Thank You!
