I turned the windgauge sight around this afternoon to bring it to the factory position. I had to shave the bottom of the level housing a couple of thousandths to clear the front sight bead but not a problem. Originally I had picked up a set of the inserts that Pedersoli makes for their Gibbs globe front. These have finer guts in the insert and no vertical support which would have masked the bubble the way I originally had it mounted. I used a diamond bit to remove half of the width of the center of the bottom of the ring and that gave a clear sight path to the top of the bubble but decided in the greater scheme of things it would be better to just turn the sight around. It is working fine in use.