I was trying to make 2 1/2" shells for use in a beautiful WJ Jeffery, I never should have sold. Another story. Using a mec grabber reloading press without modifying the press presented a problem. What I came up with was cutting the hulls using a dremel bit in a drill press was the best method I found. Then I experimented and found the best solution was a 16 ga overshot card. This filled in the gap from the missing 1/4" of hull. This allowed me to load a 7/8 oz or 1 oz (depending on the wad) load without adjusting the reloader and get a nice crimp . Greg Moats called me and asked if he could write it up for Shooting Sportsman.
