I fill my Lyman 6000 with distilled water which I drain back into the jug once done. I use Simple Green properly diluted. The part(s) to be cleaned go into a good zip-lock bag with the diluted simple green. Once done I empty the cleaning solution, clean the bag, then spray the part(s) with QD Electronic Cleaner, blow off the remaining residue, then spray the part(s) with CLP, blow off the residue, then wipe dry and let the part(s) air dry for a few hours. I do suggest you use the basket that comes with the ultrasonic cleaner.
Do you fellas use the heater function of your ultrasonic cleaner?
Next time I'll try using Dawn vs SG.
