Originally Posted by skeettx
I use a Mec SuperSizer in 10 gauge and a vice die I made on the lathe
from a Texan 12 gauge sizing ring and body.

Use plenty of Imperial Sizing Wax.

How many hulls are you trying to size?

Works great

Mike

p.s. is the interference part the body or the rim?

22 hulls and the interference is in the body of the hull, not the rim. 8 hulls will go almost all the way in with about an inch or less remaining before they stick; 12 hulls will go about half way in before sticking. Two more are in the re-sizing block. Using an arbor press, would multiple passes through the re-sizing block in a short time frame help?

Last edited by Chantry; 05/17/21 10:58 AM.

I have become addicted to English hammered shotguns to the detriment of my wallet.