Originally Posted by GLS
Originally Posted by Joe Wood
Here’s where you can get good 10 gauge brass hulls. However, the diamond at the base of the hull was too thick to allow my gun to close so I chucked them in my lathe and removed it. They will last forever.

https://www.trackofthewolf.com/Categories/PartDetail.aspx/139/1/SHOT-SHELL-10-2-58
On his other thread, I posted the link to RMC's selection and prices. A little more expensive than track of the wolf's, but the primer pocket is for shotgun primers (if that is even a factor in handloading). RMC has had reports from cowboy action shooters in 12 ga. that the shooters have exceeded 3000 reloads per brass hull. That's a lot of turkeys. Gil