Originally Posted By: Run With The Fox
I beg to differ regarding the L.C. Smith- if you have the handy tool available through the LCSCA gruppen, recocking the hammer axles is easy-- and it is a versatile little rascal, as you can decock the leaf springs with it, should you wish to detail strip the locks-- RWTF

RWTF,

You are absolutely, 100% correct. If you have the L. C. Smith cocking tool, you can cock the hammer(s) and put the barrels back on the gun. You can do it too if you're handy with a screw driver.

As you're away from home to hunt some good grouse cover and you take your LCS out of its take down case. If the opening lever is centered and the SAFE is off and you touch one of the triggers, you won't get the barrels on to cock the gun.

If you don't have the LCS tool with you or a screw driver, you can leave the LCS in its case.

Thank you for suggesting that LCS tool to cock the hammers.