I did spend a little time trying to get some of the surface rust off the barrels so my hands don't turn orange handling them. There is actually very little shallow pitting. Nearly none on the inside of the barrels which for the most part are very shiny. One very small dent near the muzzle on one barrel, and a broken off front brass bead.

Part of the bottom rib has been re-soldered at one point and the top rib is loose near the muzzle. Barrels are 32" and full/full

I'm going to look at some options for removing the rest of the rust from the barrels.

Last edited by FISHSTICKER; 12/12/20 03:59 PM.