Anybody here load for a 7mm/303 EPPS imp
I recently bought a nice custom built High Wall with really nice wood which I was told originally came into NZ from Canada from the guy he had bought it from.
The last owner a bit vague and said the last time he had loaded it was ten years ago with 52 grains 4831 and a 160 grain Norma bullet. He gave me the rest of the box of bullets along with 29 fired cases and eleven loaded rounds and it also came with RCBS loading dies.
I never use anybody else's loaded rounds and if ever there was a case for not doing so was illustrated when I pulled these bullets with an inerta puller and two of the cases fell apart at the neck area and the bullets were badly corroded and I had to dig the powder out with a fine screw driver.
The other nine cases were ok and the powder poured out alright except the bullets had corrosion at the base.
These bullets were a silver colour and matched the ones in the box he gave me.
Any advice or comments would be most welcome.
Long time since I posted a photo here and have forgotten how to.
Last edited by Nero; 03/08/20 05:16 PM.
