R.Marshall
No, don't feed it from the magazine. It is preferable to remove the extractor( you don't have to remove the retainer, just have a scribe handy to turn it around if necessary to remove the bolt). You can slide the case under the extractor by hand, you just lose some sensitivity of feeling( the tape is somewhat compressible so don't "crush" it closed). The Bullseye load should work. Tamp a quarter sheet of toilet paper over the powder, fill the case with polishing media/corn meal/ grits/or cream of wheat and plug it with toilet paper/ foam/ wax/ etc. If it doesn't fill out the case, increase the powder. Avoid using a bullet with any significant amount of Bullseye.
Mike
Last edited by Der Ami; 12/31/19 01:17 PM.
