I am working on a couple low value projects to learn on. I have a Lefever Nitro special receiver and a barrel that I want to fit up. I would appreciate some help on next steps. The barrel has little to no sideways movement but when closed the barrels do not want to lay flat on the water table. The chamber end of the barrel does not touch the breach face anywhere but is very close. See following pics.
On the next picture my intuition would be to flatten out the area @ B with the rest of the barrel flat but not sure if it is B or the shaded part of the hook that is keeping it from laying all the way down
Here is what the inside or the receiver channel looks like.
Feel free to give your wealth of experience and knowledge. I appreciate the help here. If there are some written references for this or video links I would appreciate the input.
Many Thanks
Travis
