I'm in the process of refinishing a stock. I removed all the finish in acetone, steamed all the dents, sanded with 400 (dry) to flatten all the grain and remove the minor defects. I've sanded in a coat of Pro-Custom Oil with 600 then wiped with a dry cloth. It's hanging to dry tonight. Any tips/recommendations to help me along? It's been years since I refinished a stock with PCO. The PCO was pretty thin and mineral spirits are outlawed in CA...unbelievable! So I just used it out of the can. The new PCO seems thinner than I remember. I was going to use some of the mineral spirit replacement solvent they sell, but chickened out and went with it straight.
