On Nov 14, 2018, at 3:46 PM, Milton Fxxxxxx <Milt@Fxxxxxxx.net> wrote:
Dear James,
As you suggested I am attaching a photo of the FAIR Iside SxS to make it easier to identify it. I purchased it new in box with all paperwork on 10/23/18 from xxxxxxxx.
Specs:
12g
30 barrels
Serial number 288755
Imported by IFG NA LLC, Amarillo, TX on the barrel
76mm, 3 chambers
Ammo: Herters Low recoil
IC choke tube in the right barrel
Mod choke tube in the left barrel
Both tight
I patterned the Iside at 16 yards on a steel pattern plate, 42 x 42 using white Lithium grease on the plate.
The right barrel printed true to aim. The IC pattern was centered both vertically and horizontally.
The left barrel with your modified choke tube printed true vertically however centered about 8 to the left of center.
I love the handling characteristics of the gun and I love that I can change choke tubes to fit the situation since I shoot mostly older SxS guns.
I would appreciate your help in resolving this issue.
Mr. Fxxxxxxx,
We sent your info and pics to FAIR and they informed us that the pattern produced by your gun is within factory specs.
Sent from my iPhone
