S |
M |
T |
W |
T |
F |
S |
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
3 members (dogon, Wild Skies, 1 invisible),
1,199
guests, and
3
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums10
Topics38,468
Posts545,128
Members14,409
|
Most Online1,258 Mar 29th, 2024
|
|
|
Joined: Jun 2002
Posts: 2,266 Likes: 93
Sidelock
|
OP
Sidelock
Joined: Jun 2002
Posts: 2,266 Likes: 93 |
(R) (L) MUZZLE: .037 .049 9" from muzzle: .021 .035 16" " ": .030 .051 Breech: .146 .157 6" from breech: .055 .075 9" " ": .031 .052 These are 28.5" damascus with light pitting. To me there such a big difference in the two barrels. The dent is in the left tube. I would hate to scrap these out, and will consider black powder or alternatives. What you guys think? Can the dent to repaired? Do you need other measurments to form a opinion?
|
|
|
|
Joined: Nov 2002
Posts: 9,381 Likes: 1
Sidelock
|
Sidelock
Joined: Nov 2002
Posts: 9,381 Likes: 1 |
Distance from the breech to dent might be useful (cowboy action shooting with a coach gun can be habit forming). That dent looks quite deep and with barrel pitting to boot, I wouldn't bother with these.
|
|
|
|
Joined: Feb 2004
Posts: 13,879 Likes: 15
Sidelock
|
Sidelock
Joined: Feb 2004
Posts: 13,879 Likes: 15 |
Battle, Can you email me the pics? these are just not clear enough or large enough.
spurshot@earthlink.net
|
|
|
|
Joined: May 2005
Posts: 207
Member
|
Member
Joined: May 2005
Posts: 207 |
Assuming the dent is somewhere in the middle of the barrels, the dent looks like it could be removed with opposing wedges or a hydraulic expander. With the opposing wedges, I use a concave brass block on the outside and hammer on it (with the wedges inside) to remove the last of the dent, more or less.
cheers Doug
|
|
|
|
Joined: Jan 2002
Posts: 5,683 Likes: 118
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 5,683 Likes: 118 |
I don't trust damascus barrels to begin with, let alone after a big dent has been jacked out. That dent looks like it almost goes through the barrel. I would be afraid the steel would be fatigued after removing a dent like that. You might want to check with a really good gunsmith before you shoot it.
|
|
|
|
Joined: Aug 2005
Posts: 223
Sidelock
|
Sidelock
Joined: Aug 2005
Posts: 223 |
Looks like its been shot with a .22 !
From the pics it looks like the metal has also been severely stretched (too far to raise a dent successfully even on steel, never mind damascus)- personally I wouldn't entertain a repair on this...
Jonty
|
|
|
|
Joined: Apr 2006
Posts: 118
Sidelock
|
Sidelock
Joined: Apr 2006
Posts: 118 |
Had you posted this on April first, we'd be OTFL.
|
|
|
|
Joined: Jan 2006
Posts: 15,456 Likes: 86
Sidelock
|
Sidelock
Joined: Jan 2006
Posts: 15,456 Likes: 86 |
A hack saw would definatly fix it. L.F.
|
|
|
|
Joined: Feb 2004
Posts: 13,879 Likes: 15
Sidelock
|
Sidelock
Joined: Feb 2004
Posts: 13,879 Likes: 15 |
Battle, Lots of sceptical comments, but send me some better pics by email and I'll post them to let these guys see it better and I'll let you know what I think too. My instinct says it's probably salvageable.
Jimmy, there won't be fatigue from the one deformation. It would be yielded (stretched) or a combination of yield and failed. I'm guessing it is only slightly stretched. Oscar was successful in using fluorescent magnaflux to inspect a damascus barrel. I'd recommend it too, based on what is found upon firsthand visual inspection. Magnaflux shouldn't cost much.
|
|
|
|
Joined: Dec 2003
Posts: 1,026
Sidelock
|
Sidelock
Joined: Dec 2003
Posts: 1,026 |
Hey, Chuck, do you think there is a niche for someone to specialize in Non-Destructive Examination of shotgun barrels? Or is the liability of NDE-based advice just too much for anyone to take on in our wonderful lawyer-driven world? (Or does someone specialize in this already?)
|
|
|
|
|