Su M Tu W Th F Sa
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
Who's Online
9 registered (Jtplumb, GaryD007, Bob Jurewicz, canvasback, 2 invisible), 8 Guests and 0 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
13841 Members
10 Forums
34509 Topics
483415 Posts

Max Online: 462 @ 08/05/16 09:13 PM
Page 4 of 4 < 1 2 3 4
Topic Options
#569206 - 04/07/20 10:23 AM Re: More on 2 3/4" 1 1/4 oz load [Re: L. Brown]
L. Brown Offline

Registered: 01/01/02
Posts: 10781
Loc: Iowa
That's pretty darned low for a 1 1/4 oz load.

#569208 - 04/07/20 11:00 AM Re: More on 2 3/4" 1 1/4 oz load [Re: L. Brown]
BrentD Online   content

Registered: 01/21/04
Posts: 4624
Loc: Iowa
Larry, the load I posted above would drop below what gjw posted by substituting a different Winchester or Remington wad. You can get some of those loads down quite a ways then go a little lower yet with a roll crimp if necessary.
...never pay Dave "one more dime" (thanks Stanlie)

#569306 - 04/08/20 10:02 PM Re: More on 2 3/4" 1 1/4 oz load [Re: L. Brown]
2-piper Offline

Registered: 12/31/01
Posts: 12743
Loc: Lynchburg TN
Always keep in mind if you push a given weight out a barrel to a given velocity the "Average" pressure over the entire length of the barrel is virtually identical. One does not truly raise or lower it, just re-arranges it.

As long as the peak pressure does not exceed the limits of the chamber walls, the overall ballistics of the load is of more concern everywhere else.
I Didn't Say Everything I Said, Yogi Berra

Page 4 of 4 < 1 2 3 4

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2019 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.