S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
Forums10
Topics38,498
Posts545,399
Members14,412
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: May 2006
Posts: 1,156 Likes: 23
Sidelock
|
OP
Sidelock
Joined: May 2006
Posts: 1,156 Likes: 23 |
My dad's 80ieth birthday is coming up in a year and a half, and for his birthday present, I am restocking his first bolt action deer rifle (a post 64 Model 70) in a nice French walnut stock that I got off of ebay. I've got a steel Model 70 buttplate fitted to the stock and a steel grip cap. My next step is to put an ebony forend tip on it. But I have some questions about the order in which to do things. I want to fit a stock shield to it and also a set of Dakota sling swivels. And I also want to pillar bed the stock and I may need some acraglass in the receiver area. My questions are the following, what is the best order to do things? I figure I need to get all the rough sanding down to the contour of the stock comes close to matching the buttplate before inletting for the sling swivels and stock shield. Is this correct? Also, should one pillar bed and add any acraglass before applying a stock finish or after?
|
|
|
|
Joined: Feb 2002
Posts: 79
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 79 |
I'm sure you'll get great help here, but you might try posting your question over here as well: http://forums.accuratereloading.com/eve/forums/a/frm/f/9411043Lots of very experienced folks who are as generous as the ones on this board when it comes to advice. Great project!
Dave
|
|
|
|
Joined: Oct 2008
Posts: 158
Sidelock
|
Sidelock
Joined: Oct 2008
Posts: 158 |
Doc Here is one my brother did for me that is probably similar to what you are doing. If you are interested P.M. me and I'll send you his contact info.
The remodelled Springfield is the best and most suitable all 'round rifle. - Seymour Griffin
|
|
|
|
Joined: May 2010
Posts: 1,258 Likes: 75
Sidelock
|
Sidelock
Joined: May 2010
Posts: 1,258 Likes: 75 |
PhysDoc, A question please, have you inlet and fitted the barreled action, trigger guard, and floor plate?
If you haven't you may want to start there.
|
|
|
|
Joined: May 2006
Posts: 1,156 Likes: 23
Sidelock
|
OP
Sidelock
Joined: May 2006
Posts: 1,156 Likes: 23 |
Idared, PM sent, thanks and what a beautiful rifle your brother made for you.
GD Yankee, thanks, I will check out that forum.
LRF, thanks, I've got the action, trigger guard, floor plate and magazine all inletted. My next step is the ebony forend tip, and I am practicing inletting those sling swivels onto a couple of throwaway stocks.
|
|
|
|
Joined: May 2010
Posts: 1,258 Likes: 75
Sidelock
|
Sidelock
Joined: May 2010
Posts: 1,258 Likes: 75 |
Well then you are on the home stretch. Good luck
|
|
|
|
Joined: Oct 2008
Posts: 158
Sidelock
|
Sidelock
Joined: Oct 2008
Posts: 158 |
Idared, PM sent, thanks and what a beautiful rifle your brother made for you. P.M. answered
The remodelled Springfield is the best and most suitable all 'round rifle. - Seymour Griffin
|
|
|
|
Joined: Jul 2005
Posts: 2,398 Likes: 16
Sidelock
|
Sidelock
Joined: Jul 2005
Posts: 2,398 Likes: 16 |
Merry Christmas to you all!
BUILDING A CUSTOM RIFLE: Order of Procedure of Major Steps By Steven Dodd Hughes 8/00
1. Decide on purpose, usage, caliber and sights. 2. Determine approx. weight, balance and handling qualities. 3. Choose action, barrel, stock blank and overall design. 4. Full-scale drawing and complete parts list for clients approval. 5. File-up action, alter as needed. 6. Contour, install, fit and chamber barrel. Test fire, check chamber. 7. File-up all metal parts (buttplate, grip cap, sights etc.) pre-polish and prepare for inletting. 8. Layout stock blank for grainflow, stability and character. 9. Layout stock dimensions, profile stock blank. 10. Inlet and install barreled action. 11. Inlet and install buttplate, grip cap, other stock furniture. 12. Rough shape stock contours. 13. Allow stock wood time to normalize. 14. Final shape stock contours. 15. Install sights, scope. 16. Sand stock. 17. Seal all wood surfaces. 18. Live fire sight-in and function test. 19. Seal, stain and fill all wood pores. 20. Checker. 21. Complete metal polish. 22. Reassemble and function test. 23. Disassemble for engraving. 24. Complete final stock finishing. 25. Metal finishing; bluing, case colors, etc. 26. Final assembly, test fire and sight-in. 27. Tune as needed, retest. 28. Photograph. 29. Deliver.
(There are reasons for the order of each step that one will discover after diverging from them.)
|
|
|
|
Joined: May 2006
Posts: 625 Likes: 1
Sidelock
|
Sidelock
Joined: May 2006
Posts: 625 Likes: 1 |
Mr. Hughes,
Sir,
A very full, but sadly an incomplete list. You forgot, The Bill. Even stockmakers have to eat.
Commiserations of the Season to One an All.
Harry
Last edited by Harry Eales; 12/25/10 08:43 AM.
Biology is the only science where multiplication can be achieved by division.
|
|
|
|
Joined: Sep 2008
Posts: 1,153
Sidelock
|
Sidelock
Joined: Sep 2008
Posts: 1,153 |
Many thanks, Steve! Regards, Joe
You can lead a man to logic but you can't make him think. NRA Life since 1976. God bless America!
|
|
|
|
|