doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com F.A.I.R. Shotguns.......

I was at the gun shop today and saw a couple of these SXSs. One 20 gauge and one 28. The 20 gauge felt really nice. And worked pretty smooth and worked fairly nice. Price was in the neighborhood of $2500.00. Anybody have one of these? Any opinions?

I have a FAIR trap gun from 1982 (when they went by FAIR TECNI-MEC) and it is a well put together piece and deadly accurate.

2017 review of one of their cheaper offerings:-


Advertise on ShootingUK
News
Advice
Guns
Reviews
Gundogs
Shooting
Stalking
Video
Marketplace
Lincoln Premier Compact reviewed by Shooting Times


Shooting Times
June 19, 2017
The Compact 20-bore is ideal for juniors coming into the sport and also suits ladies of a lighter frame, says Roger Glover

Lincoln Premier Compact
Lincoln Premier Compact
Overall Rating: 85%
Manufacturer: Lincoln

Price as reviewed: £949

Among the cluster of gunmakers nestled along the valley of the Mella 
river above Brescia in Italy is a company called Fabbrica Armi Isidoro Rizzini, otherwise known as FAIR. Since its inception in 1971, the UK distributor for FAIR guns has been John Rothery, with the guns bearing its brand name of Lincoln. Renowned for their robust simplicity, Lincoln guns have always had their fair share of the UK market, something that can only be accomplished with a product that matches cost to quality.

Lincoln Premier Compact – a light weight option

The Lincoln range is quite extensive, with the entry-level shotgun called the Premier. This 
is a gun on a budget without doubt, yet it doesn’t fall short of being respectable enough for any shoot. Available in 12-bore, it is a man’s gun. It is also available as a 20-bore, with a dedicated action designed solely for that gauge. The 20-bore, with its lighter build, makes for a manageable medium-bore gun. There are those who require something of less proportion as well as light weight. Juniors coming into the sport or ladies of a lighter frame might benefit from the Premier Compact 20-bore.

Taking the Premier 20-bore as 
a base, this Lincoln has 28in barrels 
as opposed to 29in. The stock is shorter at 13 ½in, with the overall balance point barely ¾in forward 
of the hinge. At 44 ¼in overall length, the Compact is exactly that, yet isn’t so small as to be of limited use.

Lincoln Premier Compact Attractive stock

The stock of the Compact — and bear in mind that this is an entry-level budget gun — is walnut, and a fair piece at that. So many low-end guns have such straight-grained wood that the stock simply becomes a handle, nothing attractive at all — but not so with this. While you would hardly rate it as glamorous, FAIR has made absolute best use of the grain to create a very attractive stock for this grade of gun. The fore-end is a little more straight grained and simple, but 
at least that leaves strength.

There is no palm swell to this 
stock; it is very slender in the hand 
and especially so at the neck, which 
is ideal for smaller hands.

Super-smooth finish

Lincoln describes the finish as waxed, which it may well be, but the base of the finish seems to be a synthetic varnish with a slight pigment to it. It gives the stock a super-smooth finish and will no doubt repel the worst of weathers. The finish is even and does indeed bring out the best of the wood. The chequering is deep and crisp with sufficient area 
to give comfortable purchase.

shotguns for children

Shotguns for young children

There are various schools of thought when it comes to buying a first gun for a boy or girl just…

The drop at heel is just on 2 ¼in, with what looks like a lot of cast due 
to the short stock but is actually just shy of ¼in. There is a 5/8in vented recoil pad to ease what little load 
there is on the shoulder.

Lincoln Premier Compact
The action is finished in satin chrome with all-black furniture and engraved game scenes

Action and trigger

As regarding the action, these guns have changed very little since the start of production, though they have had the odd little improvement here and there.

Advances in machining technology mean that all parts fit well and produce a basic but simple action that was designed from the outset to be a 20-bore. It is rather neat, with the ejectors set by tangs on the cocking rods so there are no moving parts of the ejectors in the fore-end iron. The single selective trigger breaks crisply at 4lb with selection by means of 
a sliding button in the automatic safety, which has a positive action 
and feel, yet is light in movement.

Internally, the trigger works on a standard inertia block system to engage the sears for the second barrel. Hammers are operated by coil springs set on guide rods, while strikers are angled on to the centre line and upwards or downwards for each barrel. Every part is well made; nothing looks rough or unfinished, which is quite unusual to see in a modest gun.

Externally, the action is finished 
in satin chrome with all-black furniture. Adorning this are laser-engraved game scenes on each cheek and the front of the trigger-plate, with token scrollwork and borders.

Barrels and chokes

Barrels again are pretty straight forward, 3in chambered and chrome lined throughout with steel shot proof, which means you would have no problems with your pick of cartridge.

The 6mm rib gives a clear sight picture and proportionally looks 
right above the barrels. The gun comes fitted with two choke tubes, improved cylinder in the bottom and modified in the top. You do also get 
a key and a third choke, cylinder, but looking at the patterns thrown, I don’t think you really need to go much tighter. What does impress, though, is the standard of finish on the barrels — much higher than I’d expect on this grade of gun.

It is difficult to test a gun that is built to suit smaller frames. I tend to need a relatively long stock so shooting this was rather awkward 
but despite that handicap, it is 
a gun with great balance and sufficient weight to absorb recoil 
but light enough not to fatigue. 
It will swing and continue to do 
so, which surprised me a little — 
I thought that at this weight it
would be a bit of a pointing gun 
that would not carry much momentum.

Conclusion

It would be reasonable to say that Lincoln has come a long way since its early days. It has proven that budget is not always on the poor side of compromise, but that by taking the frills away, a modest gun, capable of years of service, can be produced that is able to hold its head high in any practical shooting environment. Even using 28g loads, this little gun absorbs recoil well and doesn’t show a tendency to flip its muzzles. It is a competent gun in any circumstance and certainly well worth considering as a juniors’ gun, progression from a .410 or as a ladies’ gun.

Action/barrels

The action is basic but well executed with very little to go wrong – but if it did, it is easy and cheap to repair. Solidly built. Barrels are well finished in deep black with teh flexibility of multichokes 18/20

Stock

Impressive piece of wood for this level, much better than the synthetic wraps that some low-budget manufacturers use. Properly proportioned for this size of gun 17/20

Trigger

Simple and effective trigger. Nice large safety catch/selector that doesn’t feel cumbersome 16/20

Handling

The gun is not so light and twitchy as I thought it might be – tracking and swinging through a target is quite manageable 16/20

Value

Where I expected this gun to fall down, it excelled. It is not the cheapest on the market, but your money is going in the right direction. A solid, well-though-out shotgun. 18/20

Score 85/100

I own two FAIR guns and give them both thumbs up. One is a the Verona O/U, in 30" barrel configuration, in .410 and 28 ga. The other is a FAIR Iside Tartaruga Gold .410, with 30" barrels. Both have served me very well. Both well worth their price, IMO.

I have a sxs Fair Isidi English model 28 ga. It was a special order with left hand stock and reversed left hand double triggers. It has served me well. Occasionally after I have fired it I can't close the barrels with fresh cartridges. It is almost like the ejectors jamb. I pull out the shells, close the breech, open it and all is well. Haven't figured it out yet. It has killed a lot of birds.

When this happens to me, it is the front edge of the brass catching on the edge of the chamber. Rotating the cartridge often "fixes" the problem, but the real fix is to size the brass in a MEC Super Sizer. Perhaps that is what is happening to you.

The 28 and the 20 were both nice little guns. They were both sitting in the cabinet next to the CZs I asked about a few months ago. So I got to fiddle with all of them. 🙂