May
S M T W T F S
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
Who's Online Now
8 members (eightbore, Ian Forrester, 12boreman, Oberndorf, Ken Nelson, R Reynolds), 503 guests, and 7 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics38,505
Posts545,547
Members14,417
Most Online1,344
Apr 29th, 2024
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
Joined: Feb 2011
Posts: 356
Likes: 51
Sidelock
****
OP Offline
Sidelock
****

Joined: Feb 2011
Posts: 356
Likes: 51
Does anyone have any experience with a Williams Twilight aperture, and would you tell me if it does indeed help in lower light conditions? If so, would it work well enough for me to go to a .050 hole from the .093? I assume the brass reflects light into the eye improving twilight vision? Thanks very much.

Joined: Dec 2020
Posts: 914
Likes: 363
Sidelock
Offline
Sidelock

Joined: Dec 2020
Posts: 914
Likes: 363
Generally I find with peep sights in low light the larger the aperture the better and you don’t want any reflections off the rear ring.

A bright front sight contrasting with the game is helpful, as long as it does not shine so much that you can’t see past it and it obliterates the target.

1 member likes this: BrentD, Prof
Joined: Feb 2011
Posts: 356
Likes: 51
Sidelock
****
OP Offline
Sidelock
****

Joined: Feb 2011
Posts: 356
Likes: 51
Parabola, This is the aperture I am considering. Called a Williams Twilight.
[Linked Image from jpgbox.com]

1 member likes this: Parabola
Joined: Dec 2020
Posts: 914
Likes: 363
Sidelock
Offline
Sidelock

Joined: Dec 2020
Posts: 914
Likes: 363
I suppose the idea is to help your eye find the rear aperture but as you are meant to be looking through the rear aperture and trying to pick up the front bead and the target I am not convinced that the bright ring would assist.

1 member likes this: Hoot4570
Joined: Jan 2004
Posts: 6,727
Likes: 417
Sidelock
**
Offline
Sidelock
**

Joined: Jan 2004
Posts: 6,727
Likes: 417
Originally Posted by Parabola
I suppose the idea is to help your eye find the rear aperture but as you are meant to be looking through the rear aperture and trying to pick up the front bead and the target I am not convinced that the bright ring would assist.

Agreed. It would do just the opposite.

If you are familiar with a Hadley eyecup - made by several manufacturer's - they are adjustable for light levels. Whether there is one that would fit your sight, I don't know, but they are common on the firing line at a BPCR/BPTR event.


_________
BrentD, (Professor - just for Stan)

[Linked Image from i.imgur.com]


Joined: Feb 2011
Posts: 356
Likes: 51
Sidelock
****
OP Offline
Sidelock
****

Joined: Feb 2011
Posts: 356
Likes: 51
Parabola and BrentD, I began thinking about this when I discovered what others know, that I could shrink my groups from about 6 inches to one ragged hole by using a smaller aperture. I know, from previous experience that the deer woods grow dim enough that with a half hour of shooting time, I can't see my front sight any longer. I made an aperture sight of brass and discovered almost immediately that I had to blacken it because of light interference. I then came across the Twilight. Of course, a scope would be the answer to all this, but well, you might guess what I'm saying. The Hadley is too large but I may experiment with the idea of the shade cup. Thank you both. Kurt

Joined: Apr 2021
Posts: 87
Likes: 29
Sidelock
Offline
Sidelock

Joined: Apr 2021
Posts: 87
Likes: 29
Liverwort,
Thanks for starting this discussion, I’ve enjoyed it and learned from it. I so love carrying and shooting a rifle without a scope. However, when I have to get practical in dim light, the scope goes on. I’ve shot Williams aperture sights with good success. Always wanted to try the twilight peep, but haven’t gotten around to it. I still might. Even if the brass ring doesn’t help with light transmission, it might help with finding the peep. Also, the brass contrasting with blued steel is attractive. Kind of like an architectural detail. Larry

1 member likes this: liverwort
Joined: Jan 2004
Posts: 6,727
Likes: 417
Sidelock
**
Offline
Sidelock
**

Joined: Jan 2004
Posts: 6,727
Likes: 417
Original Lyman and Marbles were made with flip-down apertures. You could choose between very small and somewhat larger period that works OK.

You can also simply unscrew the aperture and use the threaded ring to center the front site under the dimmest light.


_________
BrentD, (Professor - just for Stan)

[Linked Image from i.imgur.com]


1 member likes this: liverwort
Joined: Feb 2011
Posts: 356
Likes: 51
Sidelock
****
OP Offline
Sidelock
****

Joined: Feb 2011
Posts: 356
Likes: 51
I agree with what you say. I want to hunt a special regs area(no centerfire rifles) and don't want to buy a special regs weapon. I just like the rifle with the iron sights. It will work out in the end, and it is fun to think about this stuff.

Joined: Jan 2014
Posts: 51
Likes: 2
Sidelock
*****
Offline
Sidelock
*****

Joined: Jan 2014
Posts: 51
Likes: 2
Merit makes two different adjustable apertures, one for hunting, one for target:

https://www.meritcorporation.com/products.html

1 member likes this: liverwort
Page 1 of 2 1 2

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!


Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.115s Queries: 41 (0.071s) Memory: 0.8519 MB (Peak: 1.8989 MB) Data Comp: Off Server Time: 2024-05-06 16:35:28 UTC
Valid HTML 5 and Valid CSS