doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Comments?

Hello All,

Have been "competing" with a friend, shooting clays. He usually wins using a Beretta DT10 choked Cyl. and Skeet.
When I use my Beretta S2 choked Mod. and Full I have been able to beat him.

When I take my Beretta AS-20-E....

(I shot -from 16yds- his "open/lower" barrel and my AS's at the patterning plate and here is the result:




:-)

Best,

JC

P.S.: This is the "isolated" AS-20-E pattern:

I’d say you could open those chokes just a tad or so….

Tell us more about your AS E 20. I am on a search for such a gun.

Hello Bill,

FYI: https://doublegunshop.com/forums/ub...;Main=46050&Number=582226#Post582226

Best,

JC

VERY tight pattern and appears to shoot low and to the left.

I don't see anything that shows an aiming point. Without that, how can you say the pattern is low and to the left? Not being confrontational, just trying to understand.

Stan,

Look closely, there is a circle on the target.

I see that now, and I didn't see that earlier. But, the AMOUNT of the "low and left" is easily explained by a poor hold at "triggering". As someone who has done extensive patterning I know how easily this can happen.

Thanks, Roger.

He can shoot the close targets and you get shoot the long ones :-)

The pattern looks easy to paint over, try it a few times? I'd try to find a light bismuth load that holds tight, and shoot ducks with it.