January
S M T W T F S
1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31
Who's Online Now
11 members (ksauers1, journeymen, 9372, 3 invisible), 90 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics36,544
Posts513,194
Members14,124
Most Online462
Aug 5th, 2016
Previous Thread
Next Thread
Print Thread
Page 2 of 3 1 2 3
Joined: Mar 2016
Posts: 279
Likes: 5
Sidelock
Offline
Sidelock

Joined: Mar 2016
Posts: 279
Likes: 5
[quote=sxsman1]I have used the Gualandi wads with terrible results.

I'm curious about the problem that you encountered with the SG16 wad, because I have found it to be excellent in straight walled hulls.
Claybuster 16 gauge wads have the smallest diameter skirt, which leads to powder migration and bloopers, in cartridges carried around in the field.
It's hard to find a straight willow on the Prairie, when you have a stuck wad, a long way from the vehicle.

Joined: Mar 2005
Posts: 517
sxsman1 Offline OP
Sidelock
*
OP Offline
Sidelock
*

Joined: Mar 2005
Posts: 517
I have tried the Gualandi wads, with the same problem I have been writing about, they don't fill the hull and I can't get a decent crimp with them. What load are you using? I would like to use them because I have a very large supply .
I don't have trouble with powder migration with the WAA 7/8 clones.
Pete

Joined: Mar 2016
Posts: 279
Likes: 5
Sidelock
Offline
Sidelock

Joined: Mar 2016
Posts: 279
Likes: 5
There's SG16 and a short SG16s. I don't use the "short".
Filling the hull is all about density of powder once you have a wad with the tallest cushion section.
SG-16 has the tallest crush section - and the powder cup is filled with little bumps that take up more space.
For example - 24 grains of SR4756, SG-16, and 1 ounce #8 shot is a perfect fit in Cheddite hulls.

Last edited by Saskbooknut; 11/13/21 04:04 PM. Reason: Completion
Joined: Jun 2008
Posts: 5,072
Likes: 20
Sidelock
**
Offline
Sidelock
**

Joined: Jun 2008
Posts: 5,072
Likes: 20
sxsman1

If you wish a better crimp, use your current load and add a "Cheerio or a Cocoa Puff" above the wad and either under or over the shot.

Bio-degradable and unseen when shot.

If you will try this, please report back on your results

This method works GREAT for me.

Mike

Last edited by skeettx; 11/13/21 04:16 PM.

[Linked Image from jpgbox.com]
USAF RET 1971-95
Joined: Jan 2002
Posts: 11,027
Likes: 12
Sidelock
**
Offline
Sidelock
**

Joined: Jan 2002
Posts: 11,027
Likes: 12
Originally Posted by DoubleTake
There are lots of published loads that are simply bad recipes. Many couple undersized wads with large capacity hulls. For example the Remington and old Winchester compression formed hulls work best with wads with a smaller diameter (Remington, Winchester/Claybuster). The larger capacity hulls like Federal, Cheddite/Herter's, Fiocchi, and non-compression formed Winchesters (which are Cheddite hulls) work best with larger diameter wads like the Gualandi/SG16, Z16 (B&P), and Cheddite wads.

When Cabela's first started selling the Herters (Cheddite) shells at very reasonable prices (real bargains when they were on sale!), I initially tried the Claybuster wads. As suggested here, they didn't work for 7/8 oz loads. The DR-16's work really well. Got my hands on a bunch of the black Rem Game Load hulls. The 7/8 oz Claybusters work very well in those. And as far as 16ga 7/8 oz wads go, the Claybusters are about the easiest ones to find, and the least expensive. I looked through old loading data using the Win WAA 1 oz wad in the Rem hulls. The Claybuster is essentially a clone of the Win 1 oz wad, with that little bump in the bottom of the cup to reduce space for lighter loads so no filler is required. Works like a charm. If only those Rems didn't have such brittle case mouths . . .

Joined: Dec 2001
Posts: 916
Likes: 5
Sidelock
**
Offline
Sidelock
**

Joined: Dec 2001
Posts: 916
Likes: 5
Larry, those black Remington hulls do get crispy, but for recreational targets as long as they hold the shot in place I'm good. They get ugly, but I've gotten 5 to 10 loadings on many of them. A split or two is no problem. I just shake my head when I hear of someone tossing them after one case-mouth split. I've got large tub of the green Remingtons 16 gauge hulls I'm going to start on this winter.

Joined: Oct 2006
Posts: 1,870
Likes: 64
Sidelock
**
Online Content
Sidelock
**

Joined: Oct 2006
Posts: 1,870
Likes: 64
No filler is needed. You’re putting the wad too far down into the Hull. When you seat the wad & shot, only push it pass the wad guide fingers on the press. You’ll hear an audible click when you pass the fingers. It’ll crimp perfectly after that. If you hold the finished shell up to the light, you’ll see that the base of the wad is seated just on your powder charge. When you crimp the shell, the crimp will seat the wad/shot in the perfect position. There is no need for a lot of wad pressure in these loadings. I’ve been doing this for years with fantastic results. Most of my 16 bore loads are 7/8 Oz too. 1 Oz will crimp even better.

I do this for the two types of wads I use for the 16. The SG16 (2.5” loads) and the DR (in 2 3/4” hulls).

Joined: Apr 2013
Posts: 622
Likes: 11
Sidelock
**
Offline
Sidelock
**

Joined: Apr 2013
Posts: 622
Likes: 11
I've abandoned loading 16ga 2 3/4 and just load 2 1/2" now that way I never have to mate the proper length shell to the shotgun, they all shoot 2 1/2" fine. Cheddite hulls SG-16-s wads, 7/8oz 8s and Greendot.

Last edited by oskar; 11/14/21 11:06 AM.

After the first shot the rest are just noise.
oskar #606232 11/14/21 11:14 AM
Joined: Dec 2001
Posts: 916
Likes: 5
Sidelock
**
Offline
Sidelock
**

Joined: Dec 2001
Posts: 916
Likes: 5
Originally Posted by oskar
I've abandoned loading 16ga 2 3/4 and just load 2 1/2" now that way I never have to mate the proper length shell to the shotgun, they all shoot 2 1/2" fine. Cheddite hulls SG-16-s wads, 7/8oz 8s and Greendot.

That's a really nice load, Oskar. I've got 1,000 or so short hulls that get the same components. My bread and butter 2 3/4" load is the Remington hull, Claybuster 0078-16 wad, 15 gr. Green Dot or Int. Clays, and a W209. Hopefully those W209's come back.

Joined: Aug 2016
Posts: 98
Likes: 9
Sidelock
**
Offline
Sidelock
**

Joined: Aug 2016
Posts: 98
Likes: 9
No Fillers. Cheddite hulls\Ched primers. No dishing.

[Linked Image from live.staticflickr.com]

Green 15.5-17.2 Green Dot and DR-16 with 7/8 oz.

Purple Herters (Cheddite) 16.5-17.2 Green Dot and SG-16 with 1 oz.

No adjustments on the 9000 between the 2 I can live with the occasional swirl, it doesn't hurt anything. Will be loading 4-5K of the 1 oz. this winter.

Page 2 of 3 1 2 3

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!


Copyright (c) 1993 - 2021 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.040s Queries: 35 (0.018s) Memory: 0.8508 MB (Peak: 1.8992 MB) Data Comp: Off Server Time: 2022-01-18 15:38:54 UTC
Valid HTML 5 and Valid CSS