doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Wanted to Buy, Borrow or Rent 24 ga. reamer

Friend and BBS member needs to locate a 24 ga. finishing chamber reamer. As mentioned, will buy, borrow or rent. Appreciate a lead or source for the reamer. Regards, Randy

Pacific Tool & Gauge, Inc.
598 Ave C
White City, OR 97503-1031
Phone: 1+ (541) 826-5808

They will make one, I just called them and ask.
You will need to send a print of what you want.

Skeet, Friend made contact with Pacific and they have lost or no longer have the specs for the 24 ga. so it's a no go with Pacific. Thanks for your reply. Randy

forget about it! Let me sell you a 24 ga gun. I shoot 2 of them!

John Boyd
Quality Arms

www.dave-cushman.net/shot/shotshellloads.html

The site above has just about every possible ga. and the bore and chamber size.

Randy, can you find cartridge drawing blueprints?
SAAMI does not list the 24 gauge
COTW does list diameters
Mike

Gauge Bore Chamber ID Chamber Rim Recess Nominal Wad
or ID Front Rear Length OD Depth Rad Load Dia
No. 'F' " 'C' " 'B' " 'E' " mm* 'A' " 'D' " 'R' " Oz Grams Inches
4 0.935 1.035 1.090 4.00 - 1.200 0.130 0.030 4 114 0.948
8 0.835 0.914 0.930 3.25 80 1.035 0.115 0.020 2 57 0.845
10 0.775 0.845 0.861 3.25 80 0.933 0.074 0.020 - 0.784
10 0.775 0.845 0.859 2.875 75 0.933 0.074 0.020 1.4375 41 0.784
10 0.775 0.845 - 2.625 65 0.933 0.074 0.020 1.3125 37 0.784
12 0.729 0.800 0.815 3.00 75 0.886 0.074 0.020 1.625 46 0.738
12 0.729 0.800 0.813 2.75 70 0.886 0.074 0.020 1.5 42.5 0.738
12 0.729 0.800 0.812 2.50 65 0.886 0.074 0.020 1.0625 30 0.738
12 0.729 0.800 ? 2.00 50 0.886 0.074 0.020 0.875 25 0.738
14 0.693 0.763 0.775 2.560 65 0.847 0.068 0.020 x x 0.702
16 0.662 0.732 0.745 2.75 70 0.815 0.062 0.020 1.125 32 0.671
16 0.662 0.732 0.744 2.560 65 0.815 0.062 0.020 0.9375 26.5 0.671
20 0.615 0.685 0.698 2.75 70 0.766 0.060 0.020 1.00 28.5 0.623
20 0.615 0.685 0.698 2.560 65 0.766 0.060 0.020 0.8125 23 0.623
24 0.579 0.649 0.661 2.50 65 0.728 0.060 0.020 - 0.587
28 0.550 0.614 0.626 2.50 65 0.688 0.060 0.020 0.5625 16 0.557
32 0.502 0.562 0.574 2.50 65 0.636 0.060 0.015 - 0.509
67 0.410 0.465 - 3.00 75 0.537 0.060 0.015 0.625 18 0.415
67 0.410 0.465 - 2.50 65 0.537 0.060 0.015 0.4375 12.5 0.415
67 0.410 0.465 0.475 2.00 50 0.537 0.060 0.015 0.3125 9 0.415

Chart makes more sense on the original site. It gives every thing you need to measure and make any chamber.

Thanks for all the information, my friend has the info and will work through the details after the weekend. randy