Am interested in finding information on two different loading dies.
The first is a straight line seating die with no makers name marked 520 on the body and 450A on the seating stem. This may be a CH die but cannot find any reference to to same in my first or later Handloaders digest.
The second is a 6.5 x 54 Manlicher Shoenauer die that is a sizing die and also a loading die. Again, there are no markings except for 6.5 mm stamped on the die body and on the bullet seating stem. (Also have one of these in .30-06.) This die came with 60 cartridge cases made by Remington and Winchester and a few by dominion.
The dies appear to be well made and work well. They fit regular loading presses. Just have never seen a sizing die that also doubles as a bullet seating die.
Have sent Mike photos of dies to post.
Bill