|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
1
|
2
|
3
|
4
|
5
|
6
|
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
|
28
|
29
|
30
|
|
|
|
|
|
|
Forums10
Topics38,445
Posts544,828
Members14,406
| |
Most Online1,258
Mar 29th, 2024
|
|
|
|
Joined: Mar 2002
Posts: 135
Sidelock
|
OP
Sidelock
Joined: Mar 2002
Posts: 135 |
I have some once fired 2" paper hulls from RST that appear to be Cheddites that I wish to reload. Got a short wad from Ballistic Products (12 SSW) that looks like a Gualandi made wad but the included data only shows two loads with Fiocchi hulls and primers.
Found three recipes in the 2007 Hodgdon manual for Remington and Winchester hulls.
Any one out there with data for RST/Cheddite paper hulls?
Jeff
|
|
|
|
|
Joined: Oct 2008
Posts: 190
Sidelock
|
|
Sidelock
Joined: Oct 2008
Posts: 190 |
Ballistic Products lists some 2" loads in one of their pamphlets.
|
|
|
|
|
Joined: Jan 2002
Posts: 89
Sidelock
|
|
Sidelock
Joined: Jan 2002
Posts: 89 |
I believe Hodgdon's website also lists some 2" loads.
Richard Howard
|
|
|
|
|
Joined: Jun 2008
Posts: 2,736 Likes: 96
Sidelock
|
|
Sidelock
Joined: Jun 2008
Posts: 2,736 Likes: 96 |
I have some data using Red Dot powder and felt wads. I use Vihtavouri 310 and Vectan AS powders as a rule if they are available to you. If so let me know and I will describe the loads. All I make use card and felt wadding. Lagopus.....
|
|
|
|
|
Joined: Mar 2002
Posts: 135
Sidelock
|
|
OP
Sidelock
Joined: Mar 2002
Posts: 135 |
Lagopus,
Red dot data would help. Don't have the V- powder.
you can post here or email me
fullandfuller@netscape.net
Jeff
|
|
|
|
|
Joined: Jun 2008
Posts: 2,736 Likes: 96
Sidelock
|
|
Sidelock
Joined: Jun 2008
Posts: 2,736 Likes: 96 |
Jeff, the information I have got for cases such as yours; ones that are not compression formed, are for use with either the Win 209 or CCI 109 primer and 7/8th. ounce of shot, platic obturator wad and card and felt to thickness (lists 7/16" fibre and 1/16" card undershot wad - closed with a roll turnover). Red Dot 19.5 grains or Trap 100 22 grains. These were all proof teated and found suitable for 2" chamber guns. Other straight wall cases trimmed down to 2" can of course be used. Good luck with them. Lagopus.....
|
|
|
|
|
Joined: Mar 2002
Posts: 135
Sidelock
|
|
OP
Sidelock
Joined: Mar 2002
Posts: 135 |
Lagopus,
Thanks for the load data. Do you have any velocity and pressure numbers?
Jeff
|
|
|
|
|
Joined: Jun 2008
Posts: 2,736 Likes: 96
Sidelock
|
|
Sidelock
Joined: Jun 2008
Posts: 2,736 Likes: 96 |
No, sorry, nothing more other than the loads are safe in 2" chambered guns as tested by the Birmingham Proof House. Lagopus.....
|
|
|
|
|
|
|
