I received my .577 double rifle yesterday. Made by Gustav Richter Breslat. Lots of case color left, bores are great and locks up tight. Chamber cast shows a length of 1.35" bore slug = .585". a cut down .577 case with a little removed about 1/4" in front of the rim fits. The problem that I see is that the inside neck diameter is .595. Going to be hard to fit a bullet in there. The closest that I can find in Handloaders manual of cartridge conversions is a .58 Roberts. Used to convert percussion to centerfire. I don't understand the crown over V on the rib and the total lack of proof marks on the barrel flats.












[img]https://i.imgur.com/VLqzQ9L.jpg[/img]
[img]https://i.imgur.com/vVjaRVU.jpg[/img]
[img]https://i.imgur.com/n03x10Y.jpg[/img]
[img]https://i.imgur.com/TT4Obyv.jpg[/img]

My saddle ring Snider 577 carbine is close in ammo

The original ammo used paper patching AND a wooden plug to expand the bullet
into the rifling

I use a .595 ( Parker Hale bullet mold opened up a bit)

and you can use Magtech brass which is thinner

https://www.grafs.com/catalog/product/productId/11079

Skeettx my book says that the Snider case is 2" long. Mine is 1.35"

found this.