Do any of you have any recommendations for a gunsmith who can re-solder a pair of barrels for a nice old Ithaca? One barrel has come loose from the rib for about 15-16 inches or so. Thanks for any tips!
Gary
Stuffzilla,
You might try a Russian gunsmith who lives in Natick MA, his name is Sergey Lyako.
http://www.rustbluing.comPete
Dewey Vicknair
565 Oak Lane
Lititz, Pennsylvania 17543
1.717.626.4226
Dewey@VicknairRestorations.com
Or if you are the do-it-yourself type with some basic skills, try this link for a tutorial.
http://www.picturetrail.com/sfx/album/view/18691676
One of the most famous doublegun shops in the country subs out their rib relays to these folks....
http://www.giacomosporting.com/Expect to have a reblack as well. I've had two relays done and several reblacks, which are superb.
I've also heard that Giacomo does good rib work. If the barrels are damascus, consider using a smith that does the type of damascus refinishing that you are expecting or have them sent specifically to the refinisher of your choice after re-laying is completed. Who refinished steel barrels would be less of an issue to me.