1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
Who's Online Now
8 members (bigblock, Hoot4570, Marc Ret, Lawrence Kotchek, Hal M Hare, 1 invisible), 89 guests, and 5 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Most Online462
Aug 5th, 2016
Thread Like Summary
Bill Graham, Stanton Hillis
Total Likes: 3
Original Post (Thread Starter)
by Salopian
Any methods you can share on smoothing a Silvers recoil pad after grinding to finish ?
Liked Replies
by Mark II
Mark II
I've had good luck using furniture polish with lemon oil and 6-800 grit wet dry.
2 members like this
by damascus
my method comes from trial and error, if you have a magnified look at the rubber after grinding it has lots of rubber parasitical,s still attached to the surface that do not want to rub off with abrasive paper etc. My solution as to make them more ridged so the abrasive will take them off. I found that a thin coating of French Polish well thinned or some fast drying cellulose Lacquer, this stiffens things up so 600 wet and dry will remove them and to get a good polish on the rubber 800 wet and dry followed by Solvol autosol polish.
1 member likes this

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2022 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.935s Queries: 11 (0.924s) Memory: 0.7496 MB (Peak: 1.4341 MB) Data Comp: Off Server Time: 2022-07-02 13:30:11 UTC
Valid HTML 5 and Valid CSS