doublegunshop.com - home Forums Like Post

I have an unusual C.Hellis. First it has a 3 digit serial number. I measured the chambers and my remarks on my sheet from a number of years ago says, 'Somewhat less than 2.5" Check with shorter gauges" I do not have a shorter gauge and have not checked it. The flats do not have a chamber length stamped on them. I will have to properly check the chambers and get back to this thread. It is also unusual in that the top tang is "bent" to the left (although there are no signs of being bent and almost appears to have been made that way.) and there is cast on. Seems to have been set up for a left hand shooter but I shoot it right handed just fine.