doublegunshop.com - home Forums Like Post

This is an old image of my horizontal display cases. I have increased the lower shelf height by an inch, increased the width by two inches. On the second from the top, I added a LED strip which is inlet into the bottom of the shelf at a 45 degree angle to give the guns more light from above. You can not see the LED strip unless you are right under it. The green has been replaced by Baize in the same color in all but one case. There will be 12 when finished but right now there are only 10 finished and one almost completed. The wood is Honey Locust which has a bit of red colored grain on a honey background.The pegs are screws that are covered with vinyl tubing which can be moved around to get eh guns spaced out and barrels horizontal to the floor and each other. The Baize can be removed and used to restore gun cases if I decide to change color or go with a leather background that I am debating.