I've lurked here now and again. I've dreamed of owning a double rifle for years as I am sure many others have. Back in 2008 after doing some research I decided to send J White Gunsmithing of Guilford, Maine a Cz Bobwhite 12 ga. for conversion to 45-120-3.25 double rifle. His YouTube videos on converting shotguns to DR's as well as some positive references led me to believe I was on solid ground. After an excess of four years and 3000 USD later, I received the finished product shown below. At least he made a new mono-block and left the original 12 ga. alone.
[url=
]fine caliber stamp[/url]
[url=
]muzzle underside[/url]
[url=
]front sight[/url]
[url=
]rer site/rib[/url]
[url=
]muzzle[/url]
[url=
]muzzle[/url]
[url=
]chamber end[/url]
[url=
]orginal and new[/url]
Please don't make the same mistake I did.
