doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Chamber Depth Measuring

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

4 members (jake van dyke, MattH, Tamid, Karl Graebner), 1,078 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,506

Posts562,185

Members14,588

Most Online9,918
Jul 28th, 2025

Print Thread

Re: Chamber Depth Measuring GregSY #8807 11/06/06 09:42 AM
Joined: Dec 2001 Posts: 3,733 Likes: 211 Alaska Mike Harrell Sidelock
Mike Harrell Sidelock Joined: Dec 2001 Posts: 3,733 Likes: 211 Alaska	KSTT Galazan has a guage that has 10 through .410 for about $35. They work well. The easiest and cheapest is to get the chamber diameter measurments and cut a flat piece of metal to the correct width. I'm at work now, but when I get home I'll look on my computer for the correct measurments. I bought one from Galazan.

Entire Thread
Subject	Posted By	Posted
Chamber Depth Measuring	kstt	11/06/06 01:03 PM
Re: Chamber Depth Measuring	GregSY	11/06/06 01:08 PM
Re: Chamber Depth Measuring	Mike Harrell	11/06/06 01:42 PM
Re: Chamber Depth Measuring	2-piper	11/06/06 01:44 PM
Re: Chamber Depth Measuring	David Williamson	11/06/06 02:26 PM
Re: Chamber Depth Measuring	Recoil Rob	11/06/06 03:24 PM
Re: Chamber Depth Measuring	NiklasP	11/06/06 03:46 PM
Re: Chamber Depth Measuring	Researcher	11/06/06 03:46 PM
Re: Chamber Depth Measuring	kstt	11/06/06 04:01 PM
Re: Chamber Depth Measuring	Mike Harrell	11/06/06 04:04 PM
Re: Chamber Depth Measuring	kstt	11/06/06 04:30 PM
Re: Chamber Depth Measuring	Mike Harrell	11/06/06 04:36 PM
Re: Chamber Depth Measuring	GregSY	11/06/06 05:43 PM
Re: Chamber Depth Measuring	bill schodlatz	11/06/06 04:09 PM
Re: Chamber Depth Measuring	crossedchisles	11/06/06 05:45 PM
Re: Chamber Depth Measuring	eightbore	11/06/06 06:12 PM
Re: Chamber Depth Measuring	rabbit	11/06/06 06:21 PM
Re: Chamber Depth Measuring	2-piper	11/06/06 08:02 PM
Re: Chamber Depth Measuring	Researcher	11/06/06 11:56 PM
Re: Chamber Depth Measuring	Jim Legg	11/07/06 12:52 AM
Re: Chamber Depth Measuring	crossedchisles	11/07/06 02:53 PM

Link Copied to Clipboard

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 3.320s Queries: 17 (0.479s) Memory: 0.8358 MB (Peak: 1.9026 MB) Data Comp: Off Server Time: 2025-10-13 16:40:12 UTC
Valid HTML 5 and Valid CSS