Battle; Good to be back. We still have some hard times ahead, but we are coping.
Mike; Forgot, you asked about the bolt adjustment. To the best of my knowledge all the thumb push & pivot lever guns had the bolt adjustment screw in the tang. These guns bolted with a vertical bolt which entered the notch in rib extension from the rear. With the introduction of the central pivot top lever, sometime following the two-hook style, the bolt bacame in effect an extension of the lever, swinging into the extension from the side & was wedge shaped, thus self-compensating & no adjustment screw was necessary. There were some diferent configurations of the pivot lever, but on mine at least, the lever always stops at center. The adjustment is not connected to the lever itself, but to the bolt.
