Register Log In

doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Fitting hard Buttplate to Stock

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

6 members (VintageProf, Tom Shaffer, bobski, Karl Graebner, 2 invisible), 559 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,501

Posts562,130

Members14,587

Most Online9,918
Jul 28th, 2025

Print Thread

Fitting hard Buttplate to Stock #81265 02/04/08 10:24 AM
Joined: May 2003 Posts: 34 Maryland baydog OP Sidelock
OP baydog Sidelock Joined: May 2003 Posts: 34 Maryland	How do you fit the hard plastic type butt-plate to the stock? I have fitted the rubber type before but not the plastic type. Is it done with a disk sander like with the rubber type? My only concern was the plastic(or what ever it is made out of) overheating from the sanding disk. Thank you Last edited by baydog; 02/04/08 10:34 AM.

Entire Thread
Subject	Posted By	Posted
Fitting hard Buttplate to Stock	baydog	02/04/08 02:24 PM
Re: Fitting hard Buttplate to Stock	Chuck H	02/04/08 04:22 PM
Re: Fitting hard Buttplate to Stock	james-l	02/04/08 09:50 PM
Re: Fitting hard Buttplate to Stock	Jimmy W	02/05/08 09:23 AM
Re: Fitting hard Buttplate to Stock	james-l	02/05/08 06:18 PM
Re: Fitting hard Buttplate to Stock	Jimmy W	02/07/08 03:03 AM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 2.488s Queries: 16 (0.548s) Memory: 0.8012 MB (Peak: 1.9025 MB) Data Comp: Off Server Time: 2025-10-11 14:17:08 UTC
Valid HTML 5 and Valid CSS