Did you have the action polished or bore work done? Regards, Jake
Mark Beasland did the polishing, but before he did he filed off the original engraving, tig welded the roll stamped "Sterlingworth" lettering on the sides of the action and also did the scalloping and rebating of the frame.
The chambers have been lengthened to 2 3/4" by Mike Orlen. The chokes are currently at .011/.018 but I will probably have Mark open them to .004/.007 as this gun will be used greater than 75% of the time as my 20-ga. skeet gun with a little time also in Wisconsin's grouse and woodcock coverts.