June
S M T W T F S
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30
Who's Online Now
4 members (WJW, dukxdog, Tim Cartmell, Ted Schefelbein), 462 guests, and 6 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics40,123
Posts570,843
Members14,671
Most Online19,682
Mar 28th, 2026
Previous Thread
Next Thread
Print Thread
#675506 06/03/26 04:15 PM
Joined: Feb 2011
Posts: 448
Likes: 102
Sidelock
**
OP Offline
Sidelock
**

Joined: Feb 2011
Posts: 448
Likes: 102
I post this as a heads-up. My Remington 541S misfired, and when I touched the bolt to recock it, it fired(X2). I removed the barreled action and immediately saw that a drift pin was protruding on the left side of the trigger group. Pushed back in, the issue was gone. On a light recoiling rifle, I don't know how this happens, but if you have one, it might be a good idea to check this annually. The issue with mine showed up after 50 years of use.

2 members like this: PhysDoc, Stanton Hillis
Joined: Oct 2006
Posts: 790
Likes: 45
Sidelock
*
Offline
Sidelock
*

Joined: Oct 2006
Posts: 790
Likes: 45
Originally Posted by liverwort
I post this as a heads-up. My Remington 541S misfired, and when I touched the bolt to recock it, it fired(X2). I removed the barreled action and immediately saw that a drift pin was protruding on the left side of the trigger group. Pushed back in, the issue was gone. On a light recoiling rifle, I don't know how this happens, but if you have one, it might be a good idea to check this annually. The issue with mine showed up after 50 years of use.

Maybe a tiny touch of Blue Loctite on the pin might avoid it ever moving and still allow it to be drifted out if need be.

1 member likes this: liverwort

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!


Copyright (c) 1993 - 2026 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.037s Queries: 19 (0.018s) Memory: 0.7941 MB (Peak: 1.9010 MB) Data Comp: Off Server Time: 2026-06-05 03:26:50 UTC
Valid HTML 5 and Valid CSS