doublegunshop.com - home Forums General Discussion DIY Gunsmithing @ doublegunshop.com MWT at forcing cone - 16ga and 20ga

April
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30

Who's Online Now

2 members (2 invisible), 580 guests, and 6 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics40,029

Posts569,690

Members14,657

Most Online19,682
Mar 28th, 2026

Print Thread

Re: MWT at forcing cone - 16ga and 20ga Bill Graham #674182 04/21/26 01:01 PM
Joined: Dec 2001 Posts: 6,567 Likes: 407 Bozeman, Mt. Daryl Hallquist Sidelock
Daryl Hallquist Sidelock Joined: Dec 2001 Posts: 6,567 Likes: 407 Bozeman, Mt.	I think in front of the forcing cone area, the minimum wall thickness would be much higher than Mr. Griffin quotes. Those numbers are ok for minimum wall thickenss down the barrel. https://docs.google.com/document/d/1PqK3UImDCrsOrk6O_2DsovHXvaNSzliSiwaP35Y6PMk/edit?tab=t.0
	1 member likes this: keith

Entire Thread
Subject	Posted By	Posted
MWT at forcing cone - 16ga and 20ga	Bill Graham	04/16/26 02:38 PM
Re: MWT at forcing cone - 16ga and 20ga	mark	04/17/26 12:24 AM
Re: MWT at forcing cone - 16ga and 20ga	Bill Graham	04/17/26 05:12 PM
Re: MWT at forcing cone - 16ga and 20ga	Marques Griffin	04/20/26 09:37 PM
Re: MWT at forcing cone - 16ga and 20ga	Daryl Hallquist	04/21/26 05:01 PM
Re: MWT at forcing cone - 16ga and 20ga	Marques Griffin	04/22/26 01:40 AM
Re: MWT at forcing cone - 16ga and 20ga	mark	04/22/26 12:00 PM
Re: MWT at forcing cone - 16ga and 20ga	keith	04/22/26 04:10 PM
Re: MWT at forcing cone - 16ga and 20ga	SKB	04/23/26 01:19 PM
Re: MWT at forcing cone - 16ga and 20ga	Daryl Hallquist	04/26/26 03:40 PM
Re: MWT at forcing cone - 16ga and 20ga	SKB	04/26/26 03:54 PM
Re: MWT at forcing cone - 16ga and 20ga	Daryl Hallquist	04/26/26 04:01 PM

Link Copied to Clipboard

Updated every minute of everyday!

Copyright (c) 1993 - 2026 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.433s Queries: 17 (0.413s) Memory: 0.8104 MB (Peak: 1.9024 MB) Data Comp: Off Server Time: 2026-04-27 14:35:50 UTC
Valid HTML 5 and Valid CSS