Register Log In

doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Baker Paragon Assembly Issues

February
S	M	T	W	T	F	S
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28

Who's Online Now

2 members (sharps4590, SKB), 3,049 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,850

Posts566,572

Members14,627

Most Online9,918
Jul 28th, 2025

Print Thread

Re: Baker Paragon Assembly Issues Tamid #670784 01/29/26 12:42 PM
Joined: Dec 2001 Posts: 6,525 Likes: 383 Bozeman, Mt. Daryl Hallquist Sidelock
Daryl Hallquist Sidelock Joined: Dec 2001 Posts: 6,525 Likes: 383 Bozeman, Mt.	If your cocking bolt is positioned properly, sometimes in double reassembly one needs to push the extractor or ejectors forward from the barrel breech before trying to install the barrels. If your problem is after installing the barrels, you must be sure the forend pushes the cocking bolt forward before trying to snap on the forend. http://www.bakercollectors.com/

Entire Thread
Subject	Posted By	Posted
Baker Paragon Assembly Issues	Tamid	01/28/26 05:40 PM
Re: Baker Paragon Assembly Issues	Jtplumb	01/28/26 06:44 PM
Re: Baker Paragon Assembly Issues	Tamid	01/28/26 06:53 PM
Re: Baker Paragon Assembly Issues	Tamid	01/28/26 07:16 PM
Re: Baker Paragon Assembly Issues	Daryl Hallquist	01/28/26 08:50 PM
Re: Baker Paragon Assembly Issues	Drew Hause	01/28/26 10:17 PM
Re: Baker Paragon Assembly Issues	keith	01/28/26 10:25 PM
Re: Baker Paragon Assembly Issues	Tamid	01/29/26 02:59 AM
Re: Baker Paragon Assembly Issues	Drew Hause	01/29/26 02:57 PM
Re: Baker Paragon Assembly Issues	Daryl Hallquist	01/29/26 05:42 PM
Re: Baker Paragon Assembly Issues	Kutter	01/29/26 08:30 PM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.418s Queries: 16 (0.398s) Memory: 0.8069 MB (Peak: 1.9024 MB) Data Comp: Off Server Time: 2026-02-01 12:57:26 UTC
Valid HTML 5 and Valid CSS