Register Log In

doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Disk Sander for Recoil Pad Fitting

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

2 members (GETTEMANS, 1 invisible), 449 guests, and 6 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,534

Posts562,506

Members14,592

Most Online9,918
Jul 28th, 2025

Print Thread

Re: Disk Sander for Recoil Pad Fitting eeb #658677 03/13/25 06:53 PM
Joined: Dec 2001 Posts: 1,834 Likes: 127 New York State Brian Sidelock
Brian Sidelock Joined: Dec 2001 Posts: 1,834 Likes: 127 New York State	I also buy aluminum oxide rolls and use the 1" wide in about 8-10" long strips in the various grades and use WD40 to lubricate and see saw the sides of the pad that is at its final state. this smooths the rubber and the base. If you want you can use a piece of wood or tongue depressor to back it as needed Brian LTC, USA Ret. NRA Patron Member AHFGCA Life Member USPSA Life Member

Entire Thread
Subject	Posted By	Posted
Disk Sander for Recoil Pad Fitting	eeb	03/13/25 11:49 AM
Re: Disk Sander for Recoil Pad Fitting	SKB	03/13/25 12:28 PM
Re: Disk Sander for Recoil Pad Fitting	Jimmy W	03/13/25 02:15 PM
Re: Disk Sander for Recoil Pad Fitting	Brian	03/13/25 04:05 PM
Re: Disk Sander for Recoil Pad Fitting	bushveld	03/13/25 09:56 PM
Re: Disk Sander for Recoil Pad Fitting	keith	03/14/25 06:17 AM
Re: Disk Sander for Recoil Pad Fitting	Brian	03/13/25 10:53 PM
Re: Disk Sander for Recoil Pad Fitting	Stanton Hillis	03/14/25 03:34 AM
Re: Disk Sander for Recoil Pad Fitting	Vol423	03/14/25 03:41 AM
Re: Disk Sander for Recoil Pad Fitting	AGS	03/15/25 06:29 PM
Re: Disk Sander for Recoil Pad Fitting	Stanton Hillis	03/16/25 12:30 AM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 1.313s Queries: 17 (1.281s) Memory: 0.8068 MB (Peak: 1.9025 MB) Data Comp: Off Server Time: 2025-10-25 09:46:45 UTC
Valid HTML 5 and Valid CSS