Register Log In

doublegunshop.com - home Forums General Discussion DIY Gunsmithing @ doublegunshop.com Zoli 12ga over .222 -- Rifle Headspace issue?

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

5 members (OSS, MattH, bushveld, jlb, 1 invisible), 620 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,490

Posts562,008

Members14,584

Most Online9,918
Jul 28th, 2025

Print Thread

Re: Zoli 12ga over .222 -- Rifle Headspace issue? Old No7 #655618 12/30/24 09:37 AM
Joined: Dec 2001 Posts: 7,306 Likes: 613 Colorado SKB Sidelock
SKB Sidelock Joined: Dec 2001 Posts: 7,306 Likes: 613 Colorado	I do not fit firing pins on rifles that far below the breech face, .005" is plenty. The firing pin tip should fill the hole in the breechface, not allowing the primer to flow into the action in my opinion. That is how I fit high pressure falling block rifles to prevent the firing pin from binding and it works well. Firearms imports, consignments
	1 member likes this: Stanton Hillis

Entire Thread
Subject	Posted By	Posted
Zoli 12ga over .222 -- Rifle Headspace issue?	Old No7	12/29/24 09:18 PM
Re: Zoli 12ga over .222 -- Rifle Headspace issue?	FlyChamps	12/29/24 11:45 PM
Re: Zoli 12ga over .222 -- Rifle Headspace issue?	Old No7	12/30/24 01:46 AM
Re: Zoli 12ga over .222 -- Rifle Headspace issue?	keith	12/30/24 09:22 AM
Re: Zoli 12ga over .222 -- Rifle Headspace issue?	SKB	12/30/24 01:37 PM
Re: Zoli 12ga over .222 -- Rifle Headspace issue?	Der Ami	12/31/24 03:25 PM
Re: Zoli 12ga over .222 -- Rifle Headspace issue?	Old No7	12/31/24 04:21 PM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.596s Queries: 18 (0.549s) Memory: 0.8036 MB (Peak: 1.9025 MB) Data Comp: Off Server Time: 2025-10-06 01:54:21 UTC
Valid HTML 5 and Valid CSS