I don't want to dispute someone else but over the years I have had great success with JB Weld on just about anything. I used to repair inside mirrors on windshields that had failed attaching steel to the mirror adhesive. I glued two pieces of plastic together on the engine of my 1978 Chevy and they are still holding today. I recently have had the bullets on one of those plastic Sierra bullet display boards fail and I have reattached several of those which is copper coated bullets to plastic. And I also recently reattached the edging on my formula countertop and it is holding beautifully. I use JB Weld on just about everything and have never had it fail. I always clamp it for a couple days. But whatever you use good luck when you get around to it.
