The long version is here
https://docs.google.com/document/d/1cvqRzkg0wEjhAAcFWr8gFi7aPFRsSIJ_hahfDxmrNAU/edit

Summary of “Cold rolled” barrel steel tensile strengths. All can be heat treated for different applications (rifle receivers) to much higher strength, and yield strength matters also.
AISI 1005: 40,000 psi
Twist, Damascus Twist, and Crolle Damascus: about 55,000 psi. Crolle had very slightly higher tensile strength.
Winchester Standard Ordnance and other "cold rolled" Bessemer/Decarbonized steels and AISI 1020: 60,000 psi
c. 1900 “Fluid Steel” (Cockerill, Siemens-Martin & Krupp Open Hearth Steel AISI 1021-1034): 75,000 – 85,000 psi
AISI 1140: 85,000
Krupp Fluss Stahl (Homogeneous Fluid Steel) was introduced about 1890 and by reported composition was similar to AISI 1045: 85,000 psi.
AISI 1040 (and modified), Bohler “Blitz”, 4140 Chrome Moly (not used until after 1930s): 95,000 – 100,000 psi
Winchester Nickel Steel and Marlin “Special Smokeless Steel”: 100,000 – 105,000 psi
Remington Ordnance Steel: 110,000 psi

https://sites.google.com/a/damascusknowledge.com/www/home