What works for me is what Brent said, with the addition of putting a couple of known neutral cast guns on either side of it, and stepping back and looking down the length. Variations in cast, especially toe in and out, are readily apparent that way. Also an easy way to measure DAH, by just standing a ruler from the tabletop to the edge of the butt. DAC is a little harder, because you have to view it from the side. I also agree that I've found most reported stock drops are usually 1/8 to 1/4 inch off what I measure.
Last edited by limapapa; 03/04/23 03:55 PM.
