doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Ferlib case label

I'm looking for a case lable for a Ferlib (Libero Ferraglio) or just a decent picture of the label. Any help is appreciated.

go to gunauction.com and scroll down a couple of pages and you will see a Ferlib trade label to cut and paste.

I looked high and low...can you find it again and copy the link??

There's one shown here, but it might take a considerable amount of effort to track down a good pic of it -- but, it's a start if all else fails.
https://www.gunsinternational.com/g...-english-stock-14-1.cfm?gun_id=101265313

Chuck:

I responded to your inquiry to me via Gunsinternational. Let me know if that worked for you.

Rem

Chuck

Love to know which model of Ferlib you have as I was the importer for these guns

John Boyd
Quality Arms

This is a 'long shot.'

When he closed Ferlib, Ivano Tanfoglio went to work for B. Rizzini (right down the street)
in Gardone. You might try contacting B. Rizzini or their US importer.

Steve,
I had thought of that too. I just thought I'd give it try before making it an international challenge.

John,
It's a Model 7, 410, 28" bbls, made in the early 90s from what I gather. It has a coin finish with very tight and tiny English rose & scroll. I picked it up in slightly rough condition from Griffin & Howe maybe 7 years ago. The plum barrels were scuffed up and I didn't care for the plum color. The stock had an added layer of finish that was nicked up and not appealing. I bent the stock to my dimensions and shot it until I had a chance and inclination to reblue the barrels. While on a hunting trip up to Oregon, I reblued them in my friend's shop. I used techniques that one of our incredibly talented late members related to me. They really came out nice. So, I refinished the stock once I returned home. The bottom picture is the Ferlib over the BR500 B. Rizzini .410, 30" bbl gun I finally got out of Italy a year ago.

Many thanks. I'll check it out and let you know.