I did take note of craigd's statement about two radically differing definitions of what constitutes rift sawing.
Unfortunately, that differing definition stems from the total contradiction where it is often stated that rift sawn lumber has the growth rings PERPENDICULAR to the face of the board, and also says that rift sawn lumber shows end grain 30 to 60 degrees to the face of the board. I have seen that same contradiction in terms myself many times. Bullshit is bullshit, no matter how you slice it.
I know you want to have it both ways, but until the math world changes the definition of PERPENDICULAR to meaning some angle from 30 to 60 degrees to the face, then you will continue to be wrong. If Hunterbid is another wood seller using incorrect terminology and charging rift-sawn prices for wood that is not actually rift-sawn, that's fine too. But calling lumber rift-sawn when it clearly is not rift-sawn will not make it so. You are only demonstrating that you are incapable of thought, and have no brain.
We already knew that.
Did you happen to also notice that craigd told Brent that there is no way that a log could be cut as shown in his ridiculous illustration? craigd was absolutely right about that. Is it you fragile ego, or your lack of intelligence that caused you to overlook that?
As far as posting pictures of my work... perhaps you are just too stupid to remember why I do not post any here. I gave the explanation to your friend canvasback when he incorrectly told us he had seen pics of my rust bluing here, and that was why he asked me to rust blue barrels for him, instead of giving the work to you. He used to send barrels to Doug Woodin PA24 instead of you. I believe he chooses CJO for that work over you since Doug passed away. I think we know the reason.
