I am not a Randy Wakeman fan on this topic.
If you read Drew Hause post above, you will see that CIP has a standard for cartridges to be used in 850 Bar proofed guns.
The problem is that the SAAMI standard is a higher pressure than acceptable in these guns. Also, we rarely know the actual pressure of the major US cartridge manufacturers, except the SAAMI upper limit.
Some smaller manufacturers of low pressure loads do publish their cartridges pressure.
It is up to you to choose wisely, or reload cartridges to confirm to CIP standards.
Last edited by Saskbooknut; 04/01/20 11:17 AM.
