Register Log In

doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com 12 ga Bismuth load with card and fiber wads

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

2 members (Ian Forrester, 1 invisible), 938 guests, and 5 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,492

Posts562,047

Members14,585

Most Online9,918
Jul 28th, 2025

Print Thread

Re: 12 ga Bismuth load with card and fiber wads LGF #553715 08/30/19 04:51 PM
Joined: Jan 2002 Posts: 67 Iowa Matt Stolley Sidelock
Matt Stolley Sidelock Joined: Jan 2002 Posts: 67 Iowa	Originally Posted By: LGF I am new to reloading have been given conflicting advice about fiber wads and nitro powders. When compressing the powder, should the fiber wad be compressed too, or only the powder and OP card, with just light pressure on the wad? Thanks. I use pressure on the nitro card only. The fiber wads are just seated lightly on the nitro card. Matt aka Iowa_303

Entire Thread
Subject	Posted By	Posted
12 ga Bismuth load with card and fiber wads	HighWall	08/29/19 05:26 PM
Re: 12 ga Bismuth load with card and fiber wads	Matt Stolley	08/30/19 03:43 AM
Re: 12 ga Bismuth load with card and fiber wads	King Brown	08/30/19 02:46 PM
Re: 12 ga Bismuth load with card and fiber wads	2-piper	08/30/19 04:26 PM
Re: 12 ga Bismuth load with card and fiber wads	King Brown	08/30/19 08:35 PM
Re: 12 ga Bismuth load with card and fiber wads	LGF	08/30/19 05:42 PM
Re: 12 ga Bismuth load with card and fiber wads	Matt Stolley	08/30/19 08:51 PM
Re: 12 ga Bismuth load with card and fiber wads	Matt Stolley	08/31/19 04:27 AM
Re: 12 ga Bismuth load with card and fiber wads	Matt Stolley	08/31/19 04:29 AM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 1.524s Queries: 17 (0.496s) Memory: 0.8034 MB (Peak: 1.9026 MB) Data Comp: Off Server Time: 2025-10-07 16:09:54 UTC
Valid HTML 5 and Valid CSS