Register Log In

doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Stock Repair with Brass Pins

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

1 members (Carcano), 373 guests, and 5 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,501

Posts562,123

Members14,587

Most Online9,918
Jul 28th, 2025

Print Thread

Stock Repair with Brass Pins #544167 04/21/19 11:19 AM
Joined: Jan 2005 Posts: 390 Likes: 2 cpa OP Sidelock
OP cpa Sidelock Joined: Jan 2005 Posts: 390 Likes: 2	I want to use brass rods and epoxy to reinforce a broken stock repair. My thoughts are to use one angling up from the bottom of the pistol grip and one from front angling parallel to grip. Currently, I'm looking at 1/8" rod. Is that large enough? Should I drill the holes slightly oversize so as to be able to get plenty of epoxy surrounding the pins? Any other ideas? Thanks.

Entire Thread
Subject	Posted By	Posted
Stock Repair with Brass Pins	cpa	04/21/19 03:19 PM
Re: Stock Repair with Brass Pins	Der Ami	04/21/19 03:25 PM
Re: Stock Repair with Brass Pins	cpa	04/21/19 03:48 PM
Re: Stock Repair with Brass Pins	Der Ami	04/21/19 05:18 PM
Re: Stock Repair with Brass Pins	BrentD, Prof	04/21/19 05:10 PM
Re: Stock Repair with Brass Pins	wannagohunting	04/21/19 05:13 PM
Re: Stock Repair with Brass Pins	damascus	04/21/19 08:26 PM
Re: Stock Repair with Brass Pins	Nitro Express	04/22/19 11:36 AM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.471s Queries: 16 (0.445s) Memory: 0.8004 MB (Peak: 1.9027 MB) Data Comp: Off Server Time: 2025-10-11 07:58:16 UTC
Valid HTML 5 and Valid CSS