Originally Posted By: John Roberts
Originally Posted By: james-l
Raw linseed oil and a 3M pad, something MP recommended. You will be amazed at the results.


You'll be amazed alright, amazed at how you removed your finish.

Be very careful using 3M Scotchbrite pads on a soft finish like TruOil or a hand rubbed linseed oil. They are very aggressive and you will eat right through the finish to bare wood in a heartbeat if you go at it too hard. Also, there are varying grades of Scotchbrite pads, some much more coarse than others, so if you decide to risk this method, better be sure you get the least aggressive grade.
Remember, you're cleaning, not refinishing.
JR


Double +1 on that


Dr.WtS
Mysteries of the Cosmos Unlocked
available by subscription