Register Log In

doublegunshop.com - home Forums General Discussion DIY Gunsmithing @ doublegunshop.com Heym 22f extractor cam, help!

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

2 members (Mt Al, arrieta2), 677 guests, and 5 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,543

Posts562,583

Members14,592

Most Online9,918
Jul 28th, 2025

Print Thread

Re: Heym 22f extractor cam, help! Zack Buck #489541 09/06/17 04:30 PM
Joined: Dec 2001 Posts: 7,318 Likes: 628 Colorado SKB Sidelock
SKB Sidelock Joined: Dec 2001 Posts: 7,318 Likes: 628 Colorado	How much slop between the rod and the hole? With the problem you describe you want as tight of a tolerance as you can get while the rod still moves freely. If it has been worked on it is likely it is no longer an even diameter and you may have some thin spots allowing the rod to hop over the cam Firearms imports, consignments

Entire Thread
Subject	Posted By	Posted
Heym 22f extractor cam, help!	Zack Buck	09/05/17 07:28 PM
Re: Heym 22f extractor cam, help!	Der Ami	09/05/17 09:45 PM
Re: Heym 22f extractor cam, help!	Zack Buck	09/06/17 02:04 PM
Re: Heym 22f extractor cam, help!	Zack Buck	09/06/17 04:14 PM
Re: Heym 22f extractor cam, help!	SKB	09/06/17 05:49 PM
Re: Heym 22f extractor cam, help!	Zack Buck	09/06/17 08:11 PM
Re: Heym 22f extractor cam, help!	Der Ami	09/06/17 08:20 PM
Re: Heym 22f extractor cam, help!	SKB	09/06/17 08:30 PM
Re: Heym 22f extractor cam, help!	skeettx	09/07/17 02:35 AM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 1.148s Queries: 17 (1.072s) Memory: 0.8069 MB (Peak: 1.9024 MB) Data Comp: Off Server Time: 2025-10-28 19:26:34 UTC
Valid HTML 5 and Valid CSS