doublegunshop.com - home Forums General Discussion DIY Gunsmithing @ doublegunshop.com Soft steel carding wheel

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

1 members (1 invisible), 876 guests, and 5 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,492

Posts562,042

Members14,585

Most Online9,918
Jul 28th, 2025

Print Thread

Re: Soft steel carding wheel Bill Graham #480791 05/16/17 04:42 PM
Joined: Jul 2012 Posts: 4,938 Likes: 342 East Alabama Der Ami Sidelock
Der Ami Sidelock Joined: Jul 2012 Posts: 4,938 Likes: 342 East Alabama	I just use a double ended mandrel, with a large pully on one side, powered by an old washing machine motor. Old school solution, but cheap and easy. You can make any speed you need, by varying size of pully. Mike

Entire Thread
Subject	Posted By	Posted
Soft steel carding wheel	Bill Graham	05/04/17 04:39 PM
Re: Soft steel carding wheel	Nick. C	05/04/17 05:19 PM
Re: Soft steel carding wheel	Bill Graham	05/04/17 07:04 PM
Re: Soft steel carding wheel	WBLDon	05/04/17 07:07 PM
Re: Soft steel carding wheel	Ken61	05/04/17 07:27 PM
Re: Soft steel carding wheel	Bill Graham	05/04/17 07:09 PM
Re: Soft steel carding wheel	ChiefShotguns	05/04/17 07:17 PM
Re: Soft steel carding wheel	Ken61	05/04/17 07:24 PM
Re: Soft steel carding wheel	Bill Graham	05/04/17 07:27 PM
Re: Soft steel carding wheel	Ken61	05/04/17 10:46 PM
Re: Soft steel carding wheel	SDH-MT	05/07/17 08:19 PM
Re: Soft steel carding wheel	SDH-MT	05/07/17 08:34 PM
Re: Soft steel carding wheel	Ken61	05/08/17 12:01 AM
Re: Soft steel carding wheel	Bill Graham	05/08/17 12:16 AM
Re: Soft steel carding wheel	SDH-MT	05/08/17 01:38 AM
Re: Soft steel carding wheel	Bill Graham	05/16/17 02:40 PM
Re: Soft steel carding wheel	craigd	05/16/17 05:23 PM
Re: Soft steel carding wheel	Ken61	05/08/17 12:57 PM
Re: Soft steel carding wheel	SDH-MT	05/09/17 05:59 PM
Re: Soft steel carding wheel	Mike Hunter	05/16/17 07:18 PM
Re: Soft steel carding wheel	Bill Graham	05/16/17 07:29 PM
Re: Soft steel carding wheel	Der Ami	05/16/17 08:42 PM
Re: Soft steel carding wheel	Mark II	05/16/17 10:07 PM
Re: Soft steel carding wheel	Bill Graham	05/22/17 02:56 PM
Re: Soft steel carding wheel	Ken61	08/09/17 03:29 PM

Link Copied to Clipboard

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.520s Queries: 17 (0.479s) Memory: 0.8385 MB (Peak: 1.9025 MB) Data Comp: Off Server Time: 2025-10-07 06:30:51 UTC
Valid HTML 5 and Valid CSS